Slot 1 Xeon
Connected to the physical slot connectors that interface to the DIMMs. Figure 1 illustrates how a Xeon SP processor’s memory controlle rs are connected to memory DIMM slots. Figure 1 Intel Xeon SP processor with two memory controllers, six memory channels and twelve memory DIMM slots. The 700Mhz Xeons shown in this video do not function with this motherboard as Intel changed the slot specifications after the 550Mhz Xeons.
We’ve spent hundreds of hours researching and comparing Mini Itx Xeon of all specifications to find the best one for any need (or budget). Here are the results.
Contents
- 3 Mini Itx Xeon Reviews on Twitter
The Best Mini Itx Xeon of 2020 – Top Rated & Reviewed
2,809 Reviews Scanned
Rank No. #1 Supermicro X10SDV-4C+-TLN4F-O Intel Xeon D-1518/ DDR4/ SATA3&USB3.0/ V&4GbE/ Mini-ITX Motherboard & CPU Combo- CPU (Included): Intel Xeon D-1518 Processor; Support up to 35W TDP (Quad-Core)
- Memory: 4x DDR4-2133/ 1866/ 1600MHz DIMM Slots, Support up to 128GB ECC/REG Memory or up to 64GB ECC/Non-ECC Unbuffered Memory
- Slots: 1x PCI-Express 3.0 x16 Slot; 1x M.2 Slot (M key 2242/2280, PCI-Express 3.0 x4)
- SATA: 6x SATA3 Ports, Supports RAID 0, 1, 5, 10 RSTe
- Ports: 2x USB 3.0 Ports, 4x USB 2.0 Ports (via headers), 2x RJ45 LAN Ports, 2x RJ45 10Base-T Ports, 1x RJ45 Dedicated IPMI LAN Port
- Support AMD Ryzen 1st and 2nd Generation / Ryzen with Radeon Vega Graphics Processors for Socket AM4
- Supports 32gb dual channel ddr4 memory 1866/ 2133/ 2400/ 2667 MHz by jedec, and 2667/ 2800/ 2933/ 3000/ 3066/ 3200/ 3466 MHz by a xmp oc mode
- VR ready: Automatically optimizes your system for VR usage, pushing for maximum performance
- In game weapons: Game boost, gaming hotkey, x boost
- Gaming certified 24 hour on and offline game and motherboard testing by esports players. Form factor: Mini ITX
- LGA1151 Supports 9th and 8th Generation Intel Core Processors
- Chipset: Intel Z390
- Memory: 2x DDR4-4000+(OC)/ 3866(OC)/ 3800(OC)/ 3733(OC)/ 3600(OC)/ 3200(OC)/ 2933(OC)/ 2800(OC)/ 2666/ 2400/ 2133 MHz DIMM Slots, Dual Channel, Non-ECC, Unbuffered, Max Capacity of 32GB
- Slots: 1x PCI-Express 3.0 x16 Slot
- SATA: 6x SATA3 Ports, Support RAID 0, 1, 5, 10
- Mini-ITX, 6.7 inch x 6.7 inch
- Intel Xeon E3-1200 v5 Series Processors
- Supports Dual channel DDR4 2133 ECC/Non-ECC UDIMM max 32 GB
- Support 8 SATA3 by C236
- Supports 1x PCIe 3.0 x16
- Intel mehlow platform Mini ITX motherboard for Intel Xeon Series processors LGA1151 socket featuring M.2, USB 3.1, support for ECC/Non-ECC DDR4 UDIMM and Intel Octane Memory
- Dual Intel I210AT Gigabit Ethernet with teaming support and additional dedicated management port
- Flexible NVMe storage options via high-speed mini-sas HD connections and port-to-port OCuLink
- Tpm-m 2.0 Ready with a 14.1 TPM header to securely store keys, digital certificates, passwords and data
- Complete IT Infrastructure Management with in-band ASUS Control Center providing a complete server management solution reducing IT operating costs with features like remote BIOS updating, monitoring multiple systems via mobile device, and one-click software updates/dispatching
- Intel Xeon processor D-1520/1521, Single socket FCBGA 1667; 4-Core, 8 Threads, 45W
- Up to 128GB ECC RDIMM DDR4 2133MHz or 64GB ECC/non-ECC UDIMM in 4 sockets
- 6x SATA3 (6Gbps) ports via SoC
- Expansion slot: 1x PCIe 3.0 x16 M.2 PCIe 3.0 x4, M Key 2242/2280
- 2x USB 3.0 ports (rear); 4x USB 2.0 ports (via headers)
- Super Micro M11SDV-8CT-LN4F Mini-ITX Motherboard with EPYC 3201 Sock Processor
- Mad EPYC 3201 Sock Processor, 8 core/8 THREAD, 30W
- Up to 512GB ECC Registered, DDR4-2133MHz SDRAM in 4 DIMMs
- 1 PCI-E 3. 0 x16 Slot, 1 M. 2 PCI-E 3. 0 x4, 2280, M Key
- Sock controller for 4 SATA 3. 0
- CPU (Included): Intel Xeon D-1540 Processor; Support up to 45W TDP (Eight-Core)
- Chipset: System on Chip
- Memory: 4x DDR4-2133/ 1600/ 1333MHz DIMM Slots, Support up to 128GB ECC/REG Memory or up to 64GB ECC/Non-ECC Unbuffered Memory
- SATA: 6x SATA3 Ports (via SoC)
- Form Factor: Mini-ITX, 6.7 x 6.7 inch / 17.0 x 17.0 cm
- Super micro MBD-X11SDV-12C-TLN2F-O
- X11SDV-12C-TLN2F
- Motherboard - mini ITX
- Intel Xeon D-2166NT
- Usb 3. 0 - 2 x 10 Gigabit LAN
Top Rated Mini Itx Xeon to Buy Now
Mini Itx Xeon Reviews on Twitter
[custom-twitter-feeds search=”Mini Itx Xeon”]
Why You Should Buy Best Mini Itx Xeon from Amazon
Amazon is not the only store that sell Mini Itx Xeon. However, there are several compelling reasons why you should buy Mini Itx Xeon from them, with the suitable Price and Reviews. Here are five:
(1) Amazon Makes Shopping Mini Itx Xeon Personal
Amazon is very good at making recommendations of Mini Itx Xeon based on your search history. From time to time, they will even show you discounted prices on Mini Itx Xeon that you previously expressed an interest in. They also make your shopping experience a little easier by showing you items that you recently viewed.
(2) Amazon Checkout is Easy
Amazon checkout is easy, especially if you already have an account. You can add Mini Itx Xeon to your cart and go through a multi-step checkout process, or you can buy Mini Itx Xeon with only one click by using your stored credit card information.
(3) Amazon Has Lots of Social Proof
Before you make a purchase for Mini Itx Xeon, you want to know that the company you are dealing with is legitimate and that others trust the company enough to make a purchase. You may also like to read what others are saying about the product in the review section. Amazon does all of this quite well.
(4) Amazon Has Great Mini Itx Xeon Images and Descriptions
In addition to still images, many of Amazon’s Mini Itx Xeon have videos. This makes it easier for you to see exactly what you are purchasing. Amazon’s Mini Itx Xeon descriptions are also quite good. In many cases, Amazon repeats the descriptions furnished by the manufacturer. In other cases, they write their own.
(5) The Amazon Site is Easy to Navigate
Navigating the Amazon site is easy. Even though the site is huge, you will not feel overwhelmed when searching for Mini Itx Xeon. This is partly due to Amazon’s filtering process. You can search for items by brand, price or user rating. You can also search for specific features.
How to Choose the Best Mini Itx Xeon (with Price and Reviews)
Although most Mini Itx Xeon are similar, there are several differences worth noting. Here are nine criteria to consider when choosing an Mini Itx Xeon:
(1) Mini Itx Xeon Price and Reviews
Although price is not the only factor to consider, it is nevertheless extremely important. The price of an Mini Itx Xeon should be in line with its value. You can compare Mini Itx Xeon reviews to make sure you are getting a fair price. This is easy to do on Amazon.
(2) Demand
The demand for a particular Mini Itx Xeon is a good indication of its ability to perform the functions for which it was designed. If a product has been around for a while and still has a high demand, it is likely a good product.
(3) Material
Mini Itx Xeon materials differ from manufacturer to manufacturer. Consider where and how you will be using your Mini Itx Xeon to determine if one material would be better than another.
(4) Size
Like most products, Mini Itx Xeons come in various sizes. Do you need a large Mini Itx Xeonor a small one? Think about where you will use your Mini Itx Xeon in order to determine the best size. You can also read the customer reviews on Amazon to see what others are saying about the size of the unit they purchased.
(5) Color
Mini Itx Xeons also come in a variety of colors. Do you need a particular color? You should also consider whether the color of your Mini Itx Xeon would have any effect on the efficiency of its operation.
(6) Durability
The durability of an Mini Itx Xeon will be contingent on the materials used as well as the quality of the manufacturing process. Additionally, the type of Mini Itx Xeon you purchase may affect its durability.
(7) Storage
Will you need to store your Mini Itx Xeon? If so, you should consider the size and weight of the Mini Itx Xeonto make sure that it can be stored properly. Also, give some consideration to the type of climate in which your Mini Itx Xeon will be stored.
(8) Customer Ratings
Customer rating is one of the best criteria for choosing an Mini Itx Xeon. It is hard to know exactly how an Mini Itx Xeon will perform until you get it home and try it out.
(9) Warranty
Make sure the Mini Itx Xeon you are considering is backed by a good manufacturer’s warranty. If it isn’t, you might be better off with another ones.
| Type | Slot |
|---|---|
| Chip form factors |
|
| Contacts | 242[1] |
| FSB protocol | AGTL+ |
| FSB frequency | 66, 100, and (on third-party chipsets) 133 MHz |
| Voltage range | 1.3 to 3.50 V |
| Processors | Pentium II: 233–450 MHz Celeron: 266–433 MHz |
| Predecessor | Socket 7 |
| Successor | Socket 370 |
| This article is part of the CPU socket series | |
Slot 1 refers to the physical and electrical specification for the connector used by some of Intel's microprocessors, including the Pentium Pro, Celeron, Pentium II and the Pentium III. Both single and dual processor configurations were implemented.
Intel switched back to the traditional socket interface with Socket 370 in 1999.
General[edit]
With the introduction of the Pentium II CPU, the need for greater access for testing had made the transition from socket to slot necessary. Previously with the Pentium Pro, Intel had combined processor and cache dies in the same Socket 8 package. These were connected by a full-speed bus, resulting in significant performance benefits. Unfortunately, this method required that the two components be bonded together early in the production process, before testing was possible. As a result, a single, tiny flaw in either die made it necessary to discard the entire assembly, causing low production yield and high cost.[citation needed]
Intel subsequently designed a circuit board where the CPU and cache remained closely integrated, but were mounted on a printed circuit board, called a Single-Edged Contact Cartridge (SECC). The CPU and cache could be tested separately, before final assembly into a package, reducing cost and making the CPU more attractive to markets other than that of high-end servers. These cards could also be easily plugged into a Slot 1, thereby eliminating the chance for pins of a typical CPU to be bent or broken when installing in a socket.
The form factor used for Slot 1 was a 5-inch-long, 242-contact edge connector named SC242. To prevent the cartridge from being inserted the wrong way, the slot was keyed to allow installation in only one direction. The SC242 was later used for AMD's Slot A as well, and while the two slots were identical mechanically, they were electrically incompatible. To discourage Slot A users from trying to install a Slot 1 CPU, the connector was rotated 180 degrees on Slot A motherboards.
With the new Slot 1, Intel added support for symmetric multiprocessing (SMP). A maximum of two Pentium II or Pentium III CPUs can be used in a dual slot motherboard. The Celeron does not have official SMP support.
There are also converter cards, known as Slotkets, which hold a Socket 8 so that a Pentium Pro CPU can be used with Slot 1 motherboards.[2] These specific converters, however, are rare. Another kind of slotket allows using a Socket 370 CPU in a Slot 1. Many of these latter devices are equipped with own voltage regulator modules, in order to supply the new CPU with a lower core voltage, which the motherboard would not otherwise allow.
Form factors[edit]
The Single Edge Contact Cartridge, or 'SECC', was used at the beginning of the Slot 1-era for Pentium II CPUs. Inside the cartridge, the CPU itself is enclosed in a hybrid plastic and metal case. The back of the housing is plastic and has several markings on it: the name, 'Pentium II'; the Intel logo; a hologram; and the model number. The front consists of a black anodized aluminum plate, which is used to hold the CPU cooler. The SECC form is very solid, because the CPU itself is resting safely inside the case. As compared to socket-based CPUs, there are no pins that can be bent, and the CPU is less likely to be damaged by improper installation of a cooler.
Following SECC, the SEPP-form (Single Edge Processor Package) appeared on the market. It was designed for lower-priced Celeron CPUs. This form lacks a case entirely, consisting solely of the printed-circuit board holding the components.
A form factor called SECC2 was used for late Pentium II and Pentium III CPUs for Slot 1, which was created to accommodate the switch to flip chip packaging.[3] Only the front plate was carried over, the coolers were now mounted straight to the PCB and exposed CPU die and are, as such, incompatible with SECC cartridges.
History[edit]
Historically, there are three platforms for the Intel P6-CPUs: Socket 8, Slot 1 and Socket 370.
Slot 1 is a successor to Socket 8. While the Socket 8 CPUs (Pentium Pro) directly had the L2-cache embedded into the CPU, it is located (outside of the core) on a circuit board shared with the core itself. The exception is later Slot 1 CPUs with the Coppermine core which have the L2-Cache embedded into the die.
In the beginning of 2000, while the Pentium-III-CPUs with FC-PGA-housing appeared, Slot 1 was slowly succeeded by Socket 370, after Intel had already offered Socket 370 and Slot 1 at the same time since the beginning of 1999. Socket 370 was initially made for the low-cost Celeron processors, while Slot 1 was thought of as a platform for the expensive Pentium II and early Pentium III models. Cache and core were both embedded into the die.
Slot 1 also obsoleted the old Socket 7, at least regarding Intel, as the standard platform for the home-user. After superseding the Intel P5Pentium MMX CPU, Intel completely left the Socket 7 market.
Chipsets and officially supported CPUs[4][5][edit]
Intel 440FX [6][edit]
- Introduced in: May 6, 1996
- FSB: 66 MHz
- PIO/WDMA
- Supported RAM type: EDO-DRAM
- Supported CPUs:
- Pentium II with 66 MHz FSB
- Celeron (Covington, Mendocino)
- Used in both Socket 8 (Pentium Pro) and Slot 1 (Pentium II, early Celerons)
- Does not support AGP or SDRAM
- Allowed up to two CPUs for SMP
Intel 440LX [7][edit]
- Introduced in: August 27, 1997
- FSB: 66 MHz
- Supported RAM type: EDO-DRAM, SDRAM
- Supported CPUs: Pentium II, Celeron
- AGP 2× Mode
- UDMA/33
- Pentium II with 66 MHz FSB
- Celeron (Covington, Mendocino)
- Introduced support for AGP and SDRAM
- Allowed up to two CPUs for SMP
Intel 440EX [8][edit]
- Introduced in: April, 1998
- FSB: 66 MHz
- Supported RAM type: EDO-DRAM, SDRAM
- Supported CPUs: Pentium II, Celeron
- AGP 2× Mode
- UDMA/33
- Pentium II with 66 MHz FSB
- Celeron (Covington, Mendocino)
- Same specifications as 440LX, but memory support limited to 256MB and no SMP support.
Intel 440BX [9][edit]
- Introduced in: April 1998
- FSB: 66 and 100 MHz (some motherboards supported overclocking to 133 MHz, allowing usage of Socket 370 CPUs using a Slocket)
- AGP 2× Mode (max memory mapping 32 or 64 MB)
- UDMA/33
- Supported RAM types: SDRAM (PC66 and PC100, PC133 with overclocking) up to 4 DIMMs of 256 MB
- Supported CPUs:
- Pentium II with 66 and 100 MHz FSB
- Pentium III with 100 MHz FSB (133 with overclocking)
- Celeron (Covington, Mendocino, Coppermine)
- Allowed up to two CPUs for SMP
Intel 440ZX[edit]
- Introduced in: November 1998
- FSB: 66 and 100 MHz (some motherboards supported overclocking to 133 MHz, allowing usage of Socket 370 CPUs using a Slocket)
- AGP 2× Mode
- UDMA/33
- Supported RAM types: SDRAM (PC66 and PC100, PC133 with overclocking)
- Supported CPUs:
- Pentium II with 66 and 100 MHz FSB
- Pentium III with 100 MHz FSB (133 with overclocking)
- Celeron (Covington, Mendocino, Coppermine)
Intel 820/820E (Camino)[edit]
- Introduced in: November 1999
- FSB: 66, 100, and 133 MHz
- AGP 4× Mode
- UDMA/66 (i820), UDMA/100 (i820E)
- Supported RAM types: RDRAM, SDRAM (PC133)
- Supported CPUs: All Slot 1 CPUs
- Allowed up to two CPUs for SMP
Via Apollo Pro / Pro+[edit]
- Introduced in: May 1998 (Pro Plus: Dec 1998)
- FSB: 66, 100 MHz (some motherboards supported overclocking to 133 MHz, allowing usage of Socket 370 CPUs using a Slocket)
- AGP 2× Mode
- UDMA/33 (VT82C586B/VT82C596A), UDMA/66 (VT82C596B)
- Supported CPUs:
- Pentium Pro with 66 MHz FSB
- Pentium II with 66 and 100 MHz FSB
- Pentium III with 100 MHz FSB (133 with overclocking)
- Celeron (Covington, Mendocino, Coppermine)
Via Apollo Pro 133[edit]
- Introduced in: July 1999
- FSB: 66, 100, and 133 MHz
- AGP 2× Mode
- UDMA/33 (VT82C596A), UDMA/66 (VT82C596B/VT82C686A), UDMA/100 (VT82C686B)
- Supported CPUs: All Slot 1 CPUs
Via Apollo Pro 133A[edit]
Slot 1 Xeon Game
- Introduced in: Oct 1999
- FSB: 66, 100, and 133 MHz
- AGP 4× Mode
- UDMA/66 (VT82C596B/VT82C686A), UDMA/100 (VT82C686B)
- Supported CPUs: All Slot 1 CPUs
- Allowed up to two CPUs for SMP
Slot 1 Xeon Cpu
See also[edit]
References[edit]
- ^'CPU Sockets Chart'. erols.com. Retrieved 2009-03-31.
- ^'PPro on a BX?-Usenet Gateway'.
- ^http://www.tomshardware.com/reviews/overclocking-special,94-2.html[dead link]
- ^List of Intel chipsets
- ^List of VIA chipsets
- ^Intel Corporation: 440FX PCIset Datasheet
- ^Intel Corporation: 440LX AGPset Design Guide[permanent dead link]
- ^Intel Corporation: 440EX AGPset Design Guide
- ^Intel Corporation: 440BX AGPset Design GuideArchived 2012-10-04 at the Wayback Machine
Slot 1 Xeon 2
External links[edit]
| Wikimedia Commons has media related to Slot 1. |
- Intel's specifications for the SC242 connectors[permanent dead link]